Blog

Explore how to size a solar farm step-up transformer for inverter harmonics, DC bias, and split-secondary configurations under IEEE & DOE standards.

A 2,000 kVA dry type transformer rejects 20 kW of heat into the room, and most electrical rooms are sized without that number. This guide shows how to read losses off the nameplate, convert them to CF

800 VDC racks do not remove the AC side of the power chain. This guide covers the three 2026 architectures, harmonic and K-factor duty, impedance matching for parallel banks, and what to put in the RF

Oversizing a generator step-up transformer for continuous current is the most common mistake we see on data center standby plants.
This guide covers the impedance chain behind a 13.8 kV bus, inrush

NEC 695 caps starting voltage drop at 15 percent at the fire pump controller and 5 percent at the motor terminals. We work through the kVA arithmetic for a 100 hp pump on a 225 kVA unit, then the lock

A nitrile gasket for an LV cover costs less than the courier charge to ship it, but its absence can park a 2,500 kVA transformer for a season.
This guide lists the transformer spare parts worth sto

Two configurations dominate hybrid solar-plus-storage interconnections: a dedicated 100 MVA step-up transformer per source, or one 150 MVA three-winding unit feeding both collectors. This guide compar

What a transformer warranty really covers in oil immersed equipment,
the six exclusions that decide most claims,
and how performance guarantees and liquidated damages differ from warranty.

Most short-circuit withstand evidence arrives as a calculation, not a type-test report. This guide covers where the fault-current input goes soft, why a bracing drawing revision can void a correct rep

NEC 450.3 gives two protection paths for a transformer, and the choice changes the breaker size, the fault study and the secondary conductor layout.
A 1,000 kVA 480 V unit draws 1,203 A, runs at 5.

A 2,000 kVA unit does not have to stay at 2,000 kVA. This guide explains how IEC 60076-7 hot-spot modelling sets a dynamic transformer rating, what the 6 K ageing rule costs in real life, and the four

Oil-immersed transformer fittings decide whether a unit can be maintained in the field.
A practical checklist of the twelve accessories - pressure relief devices, Buchholz relays, temperature indic